Serial
MAXnet Motion Controller
Item No. MAXnet
The MAXnet is a 5-axis motion controller for stepper and/or servo motor control on a single 4"x6.5" inch card. The communications interface is Ethernet and/or RS232. Each axis can be selected by the user to be an open or closed stepper or a servo axis. Outputs are provided for 16-bit analog servo output, as well as step and direction for stepper system applications. Read more...
PC78 Multi-Axis Motion Controller
Item No. PC78
The PC78 is both a PC/104 motion controller that conforms to the PC/104 ISA bus standard as well as a stand-alone controller via a RS232 communication port. The PC78 controls up to 4 axes of step and direction control or +/-10 V servo control. There are up to 12 general-purpose TTL I/O bits, 8 of which are user definable. Non-volatile memory macros store programs that can be executed via a command or programmed to an I/O bit signal. The step pulse is a TTL level 50% duty cycle square wave that supports velocities of 0 to 1,044,000 pulses per second. Read more...
