«Home : Motion Control : Product Catalog : Motion Controllers : Ethernet : MAXnet w/DBnet Motion Controller»

MAXnet 10-Axis Motion Controller

Item No: MAXnet

MAXnet 10-Axis model utilizes the new DBnet daughter board to expand the capability up to 10-axes coordinated motion.  This model is the same footprint dimensions as the original MAXnet (4” x 6.5”) and the height is now approximately 1.6”.  In addition to the expanded axes of control this model also includes additional I/O.

MAXnet models 6000 – A000 now support 16 general purpose TTL I/O in addition to 4-channels of general purpose analog input at 16-bit resolution and two additional general purpose analog outputs.  The DBnet daughter board also provides additional customization opportunities for expanded capability.

Models:

MAXnet-1000 Ethernet/RS232 1-Axis Motion Controller and I/O
MAXnet-2000 Ethernet/RS232 2-Axis Motion Controller and I/O
MAXnet-3000 Ethernet/RS232 3-Axis Motion Controller and I/O
MAXnet-4000 Ethernet/RS232 4-Axis Motion Controller and I/O
MAXnet-5000 Ethernet/RS232 5-Axis Motion Controller and I/O
MAXnet-6000 Ethernet/RS232 6-Axis Motion Controller and I/O
MAXnet-7000 Ethernet/RS232 7-Axis Motion Controller and I/O
MAXnet-8000 Ethernet/RS232 8-Axis Motion Controller and I/O
MAXnet-9000 Ethernet/RS232 9-Axis Motion Controller and I/O
MAXnet-A000 Ethernet/RS232 10-Axis Motion Controller and I/O

Features:

  • Up to 10-Axes of motion control
  • Ethernet or RS232 communications
  • Ethernet utilizes standard TCP/IP protocol
  • Absolute Encoders (up to 32-bit on all axes option)
  • RS232 baud rate = 9600 to 115.2 K
  • Servo PID update rate of 122 µs on all 5 axes simultaneously
  • Configurable PID filter with feed-forward coefficients
  • Each axis has +/- limit, home, auxiliary out, and axis control out
  • 16 general-purpose bi-directional TTL I/O
  • 2 general-purpose analog outputs with 16 bit, +/-10 VDC input
  • 4 channels of general-purpose analog input with 16-bit (+/-10 VDC)
  • Each axis has an incremental encoder input
  • Quadrature encoder feedback up to 16 MHz on all encoder inputs
  • Step pulses from 0 to 4,194,303 steps per second
  • Accuracy for point-to-point moves +/-0 counts
  • Backlash compensation
  • Custom, parabolic, S-curve, and linear trajectory profiles
  • Real-time encoder position capture
  • S-curve with 4-quadrant jerk parameters
  • Small form-factor, 4"x6.5"x1.64"
  • Over 250 ASCII character commands, universal to current and previous OMS controllers
  • Designed for expandability (custom solutions)

Accessories:

IOMAXnet: IO Breakout Board for MAXnet

CBL58-3M: IO Cable for MAXnet to IOMAXnet, 3 meter

CBLMAX-12: IO Cable for MAXnet to IOMAXnet, 12 inch

PDF Documents

Download Command ManualDownload Data Sheet